HVAC Design & Maintenance Course In Abu Dhabi

What You'll Learn from the HVAC Design & Maintenance Course in Abu Dhabi?

• HVAC Fundamentals and Principles: You will master essential heating, ventilation, and air conditioning concepts, including load calculations, thermodynamics, and psychrometrics for comprehensive system understanding.
• Air Distribution Systems: You will learn techniques for designing efficient duct networks, selecting appropriate components, and optimising airflow patterns for indoor comfort and energy efficiency.
• Refrigeration and Cooling Systems: You will understand refrigeration cycles, chiller operations, and cooling tower principles for maintaining optimal temperature control in commercial and residential buildings.
• HVAC Controls and Building Management: You will develop skills in configuring automation systems, control sequences, and energy management strategies to maximise operational efficiency and occupant comfort.
• HVAC Maintenance and Troubleshooting: You will master preventive maintenance protocols, diagnostic approaches, and systematic troubleshooting methods to extend equipment life and minimise system downtime.
• Condition Monitoring: You will learn advanced techniques for equipment performance assessment, predictive maintenance, and real-time system monitoring to identify potential issues before failures occur.

About Our HVAC Design & Maintenance Course in Abu Dhabi

The HVAC Design & Maintenance course provides practical training for individuals involved in the design, operation, and maintenance of heating, ventilation, and air conditioning systems. Time Training Center offers a 30-hour comprehensive HVAC Design & Maintenance training course in Abu Dhabi.

Our HVAC training aims to bridge the gap between college education and industry requirements in the HVAC field. The course begins with fundamental concepts, making it accessible for newcomers while building toward advanced applications required by employers in Abu Dhabi.

Our HVAC course emphasizes design elements, maintenance procedures, and techniques. This creates versatile professionals qualified for positions in HVAC design and drafting, as well as system maintenance and operations management. You will gain practical experience through real-world case studies using industry-standard software tools.

The HVAC course curriculum addresses the growing demand for qualified HVAC professionals in Abu Dhabi's construction sector. The course covers the entire system lifecycle, from initial design to ongoing maintenance. This approach equips both graduates and professionals with vital skills that significantly enhance their employability and help them advance in their careers.

Features of the HVAC Design & Maintenance Course in Abu Dhabi

• Live Project-Based Learning: You get to apply concepts directly to ongoing real-world HVAC projects and demonstrations for immediate practical experience.
• Comprehensive HVAC Data Book: You will get access to detailed reference materials covering fundamental principles, technical specifications, and industry standards.
• Heat Load Calculation Practice: You will develop essential skills in calculating heating and cooling requirements for residential buildings using industry methodologies.
• Chilled Water System Design: You will learn proper pipe sizing techniques and system design principles for efficient chilled water distribution.
• Fresh Air & Ventilation Analysis: You will master calculation methods for appropriate fresh air requirements and ventilation system design for optimal indoor air quality.
• Industry Software Training: You will gain proficiency in specialised HVAC design software, including MCQUAY and BETA, for professional system planning.

Who Can Join Our HVAC Design & Maintenance Course in Abu Dhabi?

• Fresh Graduates and Newcomers: Recent graduates with no prior HVAC experience who are looking to enter the field. The course starts with fundamentals, making it ideal for fresh graduates.
• Engineering Professionals: Mechanical, electrical, and building services engineers looking to specialise in HVAC systems design and maintenance for career advancement.
• Facility Managers: Building operations managers are aiming to enhance their technical knowledge of HVAC systems to improve facility performance and reduce operational costs.
• Maintenance Supervisors: Team leaders responsible for maintaining building systems who want to implement more effective preventive maintenance strategies.

HVAC Design & Maintenance Course Modules

PART 1: HVAC DESIGN

Module 1: Introduction to HVAC

• Chapter 1.1: Basics of HVAC Systems
• Lesson 1.1.1: Purpose and Importance of HVAC Systems
• Lesson 1.1.2: Components of HVAC Systems
• Chapter 1.2: Fundamentals of Refrigeration Systems
• Lesson 1.2.1: Principles of Refrigeration
• Lesson 1.2.2: Vapour Compression Cycle
• Chapter 1.3: Understanding Heat Transfer
• Lesson 1.3.1: Conduction, Convection, and Radiation
• Lesson 1.3.2: Practical Examples in HVAC Systems
• Chapter 1.4: Psychrometric Chart Analysis
• Lesson 1.4.1: Reading and Interpreting Psychrometric Charts
• Lesson 1.4.2: Applications in HVAC Design

Module 2: Air Conditioning Systems

• Chapter 2.1: Types of Air Conditioning Systems
• Lesson 2.1.1: Window ACs, Split ACs, Centralized ACs, VRV/VRF Systems
• Chapter 2.2: FAHUs, FCUs, and AHUs
• Lesson 2.2.1: Functionality and Applications
• Chapter 2.3: Chillers, Condensers & District Cooling
• Lesson 2.3.1: Air-cooled, Water-cooled, and Absorption Chillers
• Chapter 2.4: Understanding Refrigerants
• Lesson 2.4.1: Types of Refrigerants (R22, R410A, R407C, etc.)
• Lesson 2.4.2: Environmental Impact and Regulations
• Lesson 2.4.3: Tonnage Estimation Using Refrigeration Chart

Module 3: Design of Air Conditioning

• Chapter 3.1: HVAC Units and Conversion
• Lesson 3.1.1: Common Units (BTU, Tons, kW, etc.)
• Chapter 3.2: Heat Load Calculation
• Lesson 3.2.1: Manual E20 and Excel Analysis
• Lesson 3.2.2: Case Studies and Examples
• Chapter 3.3: HAP Software Training
• Lesson 3.3.1: HAP Calculations and Analysis

Module 4: Ventilation Systems

• Chapter 4.1: Fresh Air and Exhaust Air Calculation
• Lesson 4.1.1: Standards and Guidelines (ASHRAE, Local Codes)
• Chapter 4.2: Smoke Ventilation Systems
• Lesson 4.2.1: Fire Safety Codes and Compliance
• Chapter 4.3: Car Park & Kitchen Ventilation
• Lesson 4.3.1: CO Monitoring and Exhaust Systems
• Chapter 4.4: Ventilation Fan Selection
• Lesson 4.4.1: Smoke & Car Park Exhaust Fans
• Lesson 4.4.2: Kitchen Ventilation Systems

Module 5: Duct Design

• Chapter 5.1: Duct Sizing and Calculation
• Lesson 5.1.1: Duct Aspect Ratio and Friction Loss
• Chapter 5.2: Duct Materials and Gauges
• Lesson 5.2.1: Galvanized Steel, Aluminum, Fiberglass, etc.
• Chapter 5.3: Duct Sizing Software Training
• Lesson 5.3.1: MQuay Duct Sizing Software

Module 6: Fan Selection and ESP Calculation

• Chapter 6.1: Fan Selection with McQuay
• Lesson 6.1.1: Calculating Fan SP and ESP

Module 7: Duct Accessories

• Chapter 7.1: Grilles and Diffusers
• Lesson 7.1.1: Types and Selection Criteria
• Chapter 7.2: Dampers and VAV Systems
• Lesson 7.2.1: Volume Control, Motorised, and VAV Dampers

Module 8: Chilled Water Systems

• Chapter 8.1: Types of Chillers
• Lesson 8.1.1: Air-cooled vs. Water-cooled
• Chapter 8.2: Chilled Water Pumps
• Lesson 8.2.1: Primary and Secondary Pumps
• Chapter 8.3: Chilled Water Pipe Sizing
• Lesson 8.3.1: Flow Rate and Velocity
• Chapter 8.4: Dosing Systems
• Lesson 8.4.1: Chemical Treatment and Corrosion Prevention

Module 9: HVAC Controls

• Chapter 9.1: Thermostat and Pump Controls
• Lesson 9.1.1: Control Systems and Configurations
• Chapter 9.2: Chiller Plant Manager Systems
• Lesson 9.2.1: Monitoring and Optimising Chiller Performance

PART 2: HVAC MAINTENANCE

Module 1: Introduction to HVAC Maintenance

• Chapter 1.1: Safety and Overview
• Lesson 1.1.1: Safety Protocols and Best Practices
• Chapter 1.2: Tools, Parts, and Components
• Lesson 1.2.1: Compressors, Evaporators, Condensers, etc.

Module 2: Maintenance of AC Systems

• Chapter 2.1: Tools and Equipment
• Lesson 2.1.1: Identifying Parts and Components
• Chapter 2.2: Compressor Types
• Lesson 2.2.1: Reciprocating, Scroll, Screw, Centrifugal Compressors

Module 3: AC Types in UAE and PPM Standards

• Chapter 3.1: AC System Types
• Lesson 3.1.1: Window, Split, Central, District Cooling
• Chapter 3.2: Preventive Maintenance Standards
• Lesson 3.2.1: PPM Guidelines and Checklists

Module 4: Chilled Water Systems

• Chapter 4.1: Components and Operation
• Lesson 4.1.1: Air-cooled, Water-cooled, Absorption Chillers
• Chapter 4.2: Maintenance Logs and Checklists
• Lesson 4.2.1: Record Keeping and PM

Module 5: VRV/VRF Systems

• Chapter 5.1: Components and Maintenance
• Lesson 5.1.1: Troubleshooting Techniques

Module 6: AHU/FCU/FAHU Maintenance

• Chapter 6.1: Insulation and Cladding
• Lesson 6.1.1: Preventive Maintenance Standards
• Chapter 6.2: Valve Packages
• Lesson 6.2.1: Calibration and Replacement
• Chapter 6.3: Belts and Motors
• Lesson 6.3.1: Belt Tension and Alignment
• Chapter 6.4: System Monitoring
• Lesson 6.4.1: Thermometers, Gauges, and Diagnostics

Module 7: Chilled Water Reports Analysis

• Chapter 7.1: Chemistry Reports
• Lesson 7.1.1: Microbiology and Inhibitor Analysis
• Lesson 7.1.2: Testing Procedures

Module 8: Lubrication Analysis

• Chapter 8.1: Lubricant Fundamentals
• Lesson 8.1.1: Types and Applications
• Chapter 8.2: Lubrication Procedures
• Lesson 8.2.1: Manual and Automatic Methods
• Chapter 8.3: Oil Analysis Reporting
• Lesson 8.3.1: Reporting Techniques

Module 9: Vibration Analysis

• Chapter 9.1: Vibration Principles
• Lesson 9.1.1: Data Acquisition and Monitoring
• Chapter 9.2: Fault Analysis
• Lesson 9.2.1: Corrective Actions and Testing

Special Topic

• Chapter S.1: Low Delta T Syndrome
• Lesson S.1.1: Causes and Corrective Actions
• Chapter S.2: Case Study
• Lesson S.2.1: Practical Application and Analysis

Real-World Activities and Case Studies in HVAC Design & Maintenance Course

• Activity 1: Heat Load Calculation for Residential Building

A comprehensive heating and cooling load analysis for a residential building, calculating design parameters based on building envelope, orientation, occupancy patterns, and local climate conditions to determine appropriate equipment sizing.

• Activity 2: Chilled Water Pipe Sizing

Design and size a complete chilled water piping system, applying hydraulic principles to determine optimal pipe diameters, flow rates, and pressure drops while ensuring efficient thermal energy transfer throughout the distribution network.

• Activity 3: Calculation of Fresh Air

Determine appropriate ventilation requirements for various building types according to occupancy classifications and international standards, designing systems that maintain proper indoor air quality while optimising energy consumption.

• Activity 4: Smoke Management Calculation

Develop comprehensive smoke control calculations and design appropriate smoke management systems for commercial buildings, ensuring compliance with life safety codes and effective emergency operations during fire events.

HVAC Design & Maintenance Course Outcomes and Career Opportunities in Abu Dhabi

The HVAC Design & Maintenance course provides a solid foundation for your career path in the construction and HVAC sectors in Abu Dhabi. These roles offer stability and opportunities to work across the rapidly growing construction and facility management industries in Abu Dhabi. The following are some of the outcomes that you can expect after completing our HVAC Design & Maintenance Course in Abu Dhabi;

• You will gain a solid understanding of HVAC system fundamentals and design principles.
• You will learn how to design efficient heating, ventilation, and air conditioning systems based on international standards.
• You will acquire hands-on knowledge of HVAC equipment, components, and maintenance procedures.
• You will understand the calculation methods for heat load, duct sizing, and ventilation requirements.
• You will enhance your ability to read and interpret HVAC drawings and blueprints.
• You will develop practical skills in troubleshooting and repairing HVAC systems.
• You will learn energy efficiency practices and sustainable HVAC solutions.
• You will improve your career prospects in the MEP and construction industry.

Job Roles After Completing the HVAC Design & Maintenance Course in Abu Dhabi

• HVAC Technician
• Maintenance Assistant
• HVAC Designer
• HVAC Engineer
• Facility Supervisor
• Building Services Coordinator
• Maintenance Manager
• HVAC Project Lead
• Facility Management Director

HVAC Design & Maintenance Training Options

How to Get HVAC Certification?

1. Enrol in Time’s HVAC Course in Abu Dhabi
2. Attend the HVAC training led by our Experts
3. Complete the HVAC Course Projects and activities 
4. Get your HVAC Certification from Time Training Center

Why Choose Time Training Center for HVAC Training in Abu Dhabi?

Here are a few reasons why you should choose Time Training Center for HVAC training in Abu Dhabi;

• Industry-Experienced Instructor: Our HVAC course is delivered by an instructor with extensive practical experience across various HVAC projects and real-world implementations.
• Specialised Training Facilities: We offer purpose-built classrooms equipped with technical tools and corporate training rooms designed for professional learning environments.
• Strategic Location: Our training center is conveniently located near Madinat Zayed Shopping Centre in Abu Dhabi, providing excellent accessibility for students across the emirate.
• Pathway for Further Specialisation: We also offer courses in Plumbing Design, Revit MEP, and other related training, creating clear pathways for continued professional development.